The Wave TTA Transmitter Trip-Amplifier is programmable to suit any common DC input type. The device will measure, monitor, convert, filter and isolate the signal, producing a DC analog output proportional to the input. It can be powered from any supply between 18 to 264 V (AC or DC), without modification, and has two fully configurable SPDT relay contact outputs capable of handling currents up to 3A.
The universal inputs allow the user the freedom of adjustable response times, upscale or downscale burnout and up to 100-point linearisation. The analog output can be re-transmission or isolation, while the two SPDT relays can be controls or alarms with 3 A contact rating and delay or deadband adjustments.
The device is simple to configure, with adjustments performed from a computer interface. Test terminals are provided to permit input and output signal checks without the need to remove cables.
Housed in a black Waveseries UL94 V0 casing, the device can be mounted on TS35 or TS32 DIN rail with a 45 mm width. Pluggable connectors allow for screw or tension clamp wiring.
Phone: 02 9671 9999
ICP DAS DLW-1120 mini weather station
This robust device can monitor wind speed, wind direction, pressure, humidity, temperature,...
ICP DAS I-7018Z-G/S3 thermocouple input module
I-7018Z-G/S3 is a high-performance 10-channel thermocouple input module designed for precise...
Gossen Metrawatt PROFITEST H+E EXPERT CHECK tester for AC charging stations
The handheld tester enables electricians to test the functionality, electrical safety and...
