Rackpower C13 to C20 IEC cordset
11 February, 2010 | Rackpower Australia
Rackpower's C13 to C20 IEC cordset is available in 1, 2 or 4 m sizes.
AEMC Instruments Simple Logger II Model ML912
05 February, 2010 | AEMC Instruments
The Simple Logger II Model ML912 is a two-channel, AC current recording device that incorporates two user-selectable measurement ranges of 0.5-100 and 5-1000 A.
Emona Instruments CableEye cable test systems
05 February, 2010 | Emona Instruments Pty Ltd
The CableEye range of PC-based cable test systems, from CAMI Research, covers basic electrical continuity measurement, continuity measurement with resistance and high-voltage testing.
CrispTech Moxa NPort S8455I-MM-SC ethernet switch and server
05 February, 2010 | CrispTech Pty Ltd
The Moxa NPort S8455I-MM-SC combines an ethernet switch and serial device server in a single solution, with two fibre ethernet ports, three ethernet ports and four RS-232/422/485 serial ports. Its compact size saves cabinet space and the all-in-one design reduces overall power consumption.
NHP Eldon enclosures
05 February, 2010 | NHP Electrical Engineering Products Pty Ltd
The Eldon range of enclosures is available in several sizes, from small terminal boxes to double-door, floor-standing enclosures, along with a range of accessories.
Bosch Security Systems Camera 200
05 February, 2010 | Bosch Security Systems Pty Ltd
The Camera 200 Series CCTV solution is a compact IP camera that operates as a self-contained surveillance system, suitable for use by small businesses and enterprises.
Stahlin J Series industrial enclosures
05 February, 2010 | Stahlin Non-Metallic Enclosures
The J Series industrial enclosures are designed for harsh, aggressive environments. Originally developed as an electrical junction box for the oil refining and petrochemical industries, the series has developed into a versatile industrial enclosure with varied applications for use from high-end electronics to extreme, corrosive indoor and outdoor applications.
Jaycar Electronics WattsClever Power Monitor
05 February, 2010 | Jaycar Electronics Pty Ltd
The WattsClever Power Monitor (model MS6155) enables households and businesses to monitor their electricity usage in detail.
Jaycar Electronics Mains Standby Power Saver
05 February, 2010 | Jaycar Electronics Pty Ltd
The Mains Standby Power Saver (model MS6146) is a power switch that monitors electrical appliances connected to it and, once it detects that they are in standby mode, will switch them off completely after a short delay.
Soanar IAP-120/120+ industrial wireless access point
05 February, 2010 | Soanar Limited
The IAP-120/120+ industrial wireless access point from ORing Industrial Networking is an IEEE802.11b/g WLAN access point (WAP) with two LAN ports that can be configured to operate in AP, bridge, repeater or AP Client modes.
HPM Extra Safe power points with rotating safety covers
05 February, 2010 | Legrand Australia P/L
Rotating, spring-loaded safety covers feature on HPM Extra Safe power points and remain firmly closed when not in use.
AMP NETCONNECT Sigma-Link copper cabling system
04 February, 2010 | Commscope
The AMP NETCONNECT Sigma-Link is a pre-terminated and easy to install copper cabling system.
FLIR BuildIR infrared building analysis software
03 February, 2010 | Teledyne FLIR
FLIR BuildIR is a software package specifically designed to carry out advanced analysis of building structures, by analysing images taken with an infrared camera and creating inspection reports based on these images.
Maser armoured cables
01 February, 2010 | Maser Communications
Maser supplies armoured cable solutions to harsh cable environments that extend past the instrumentation level and can offer an armoured solution for a wide variety of applications.
FLIR infrared camera recalibration service
01 February, 2010 | Teledyne FLIR
Owners of FLIR infrared cameras can now have their cameras recalibrated up to 1500°C at the fully accredited service laboratory at FLIR Systems’ head office at Notting Hill in Melbourne.
