In-monitor display LCD panels
01 July, 2008 | Midwich Australia
The Marshall Electronics IMD LCD panels with in-monitor display functionality are designed for video-production houses, broadcasters and mobile units, providing an ‘all-in-one’ solution that allows information to be displayed on screen.
Festoon cables
01 July, 2008 | Nexans Olex Australia Pty Ltd
The Rheyflat-N screened and unscreened rubber flat festoon cables are designed to be used in handling systems, lifts and e-chain cable carrier systems in power, control and bus applications with high mechanical stress and frequent bending in one plane only. The copper-screened versions of the cable are used in environments where protection is needed against electro-magnetic disturbances caused by power cables.
BG42 and BG45 brushless DC motors
01 July, 2008 | M Rutty & Co Pty Ltd
The Dunkermotoren range of brushless DC motors has been expanded with the release of the BG42 and BG45 models, designed for use in industrial automation and medical applications.
Power condition assessment
01 July, 2008 | Megger Limited
Delta3000 is an automated insulation power factor test set to non-destructively assess the condition of high-voltage electrical equipment such as transformers, circuit breakers and motors, and measuring the excitation current and inductance of transformer windings
Light switches
01 July, 2008 | Clipsal - by Schneider Electric
The Saturn 250V range expands on the existing C-Bus wall switches by offering a switch to suit every electrical switching application, including wall, architrave, dimmer and cooker switches.
Enclosure power distribution units
24 June, 2008 | Eaton Electrical (Australia) Pty Ltd
Eaton Corporation has available the Powerware Enclosure Power Distribution Units (ePDU). The broad portfolio of enclosure-based solutions is suitable for datacentres across all power densities providing flexible power distribution for mixed IT environments including blade servers, network and storage applications.
Plug-and-go MPO fibre connectivity system
16 June, 2008 | Commscope
The AMP NETCONNECT MPO connector system is a complete end-to-end optical fibre solution supporting 10 Gigabit ethernet. It is a pre-terminated, plug-and-play optical fibre cabling platform designed specifically for data centre and backbone cabling applications.
Electrical enclosure coolers
01 June, 2008 | Compressed Air Australia Pty Ltd
The Exair Cabinet Cooler is a compact NEMA 12 (IP52)-rated means to purge and cool electrical control panels, protecting sensitive electronics from heat, dirt and moisture.
Power measurement
01 June, 2008 | Siemens Ltd
The Sentron PAC3200 is a combination power measuring and monitoring device, designed as a replacement for conventional analog display instruments.
OfficePac PSWC40 wall-mount cabinet
01 June, 2008 | Cable Ways Ltd
The OfficePac PSWC40-6 wall cabinet is a 6RU high and 400 mm deep enclosure designed to accommodate the patching and signal distribution functions of data networks, audio studios and multimedia home integration.
Panel-mounting enclosures
01 June, 2008 | M Rutty & Co Pty Ltd
Incabox is a panel-mounting enclosure for electrical and electronic products. It has been designed for use with machining equipment and can be mounted on the front panel of the electrical control system.
Power factor correction contactor
01 June, 2008 | Ramelec Pty Ltd
The range of capacitor contactors of the EPCOS B44066S*J230/N230 series has been extended by a 100-kvar version for PFC equipment with and without reactors, which increases the range to a total of seven power stages: 12.5, 20, 25, 33, 50, 75 and 100 kVAr.
Cable jointing system
01 June, 2008 | KD Fisher & Co Pty Ltd
The Lovink-Enertech B.V medium voltage cable joints are claimed to solve problems associated with cable jointing such as the ingress of moisture and water, which can lead to catastrophic arcing failure of the joint.
Video intrusion detection
01 June, 2008 | ADT Wireless Pty Ltd
MotionViewer is a wireless video intrusion detection system designed for use in homes and small and medium businesses such as warehouses, construction sites, retail shops and small commercial areas.
Variable-speed drives
01 June, 2008 | Baldor Australia Pty Ltd
The VS1MX frequency inverter drives for AC motors is designed to reduce energy costs in automation for common applications such as fan and pump control, as well as in clean-area processing in the food and pharmaceutical industries.
