Electrical distribution

Advantech APAX-5343 and -5343E PAC power supply modules

10 November, 2011 | Supplied by: Advantech Australia Pty Ltd

Advantech has released two PAC power supply modules with 72 W output power for their APAX series. The APAX-5343 and -5343E have passed Energy Star compliance and provide a power transmission efficiency of over 88% from AC input to DC output, providing power for more APAX modules.


Connector-Tech ALS Cannon APD plugs

10 November, 2011 | Supplied by: Connector-Tech ALS Pty Ltd

The Cannon APD plugs have an IP rating of IP69K and are suitable for use in transport and the food and beverage industry.


Whale series WUE-567 5-port unmanaged IP67 10/100 ethernet switch

10 November, 2011 | Supplied by: Ethernet Direct

The Whale series WUE-567 is a reliable and fault-tolerant industrial 5-port unmanaged 10/100 ethernet switch. Built with IP67-rated RJ45 connectors, it can withstand a variety of extreme conditions such as high temperature, extreme shock, vibration, dust particles, oil or liquid immersion.


Connector-Tech ALS MIL-C-55116 and MIL-C-10544 audio connectors

09 November, 2011 | Supplied by: Connector-Tech ALS Pty Ltd

The MIL-C-55116 and MIL-C-10544 audio connectors can be used in communications equipment where reliability is needed under the most severe environmental conditions.


Schmersal RSS 36 series safety sensors

09 November, 2011 | Supplied by: Control Logic Pty Ltd

The Schmersal RSS 36 series electronic safety non-contact sensor provides up to 10 mm sensing distance for applications such as gate or hatch monitoring, position control and protection.


Harting Han Modular series inserts

08 November, 2011 | Supplied by: Harting (HK) Limited

The Han Modular series inserts allow event installers to create high-density connectivity and cabling solutions with total signal handling flexibility (eg, audio, video, communication, data and power) through different rugged IP65/67 hoods and housings suitable for harsh handling conditions.


Allen-Bradley Guardmaster safety relays

08 November, 2011 | Supplied by: Rockwell Automation Australia

The new line of Allen-Bradley Guardmaster safety relays features single-wire communication capability that helps eliminate the need for dual-channel connection between relays.


TE Connectivity Mixed Media Platform data centre infrastructure solution

25 October, 2011 | Supplied by: Commscope

The Mixed Media Platform data centre infrastructure solution has been designed to increase rack efficiency by supporting a mixed copper and fibre infrastructure. It provides a common look and feel for data centre patching frames, provides standards-compliant installation inside and outside the 19 envelope and additional patching space on the frame when high port density switches are deployed.


Seven safety tips when buying or installing Christmas lights

24 October, 2011 | Supplied by: NECA/National Electrical & Communications Association

NECA warns consumers should be careful when buying products manufactured overseas as they may not meet Australian standards.


Overhead power lines insulation failure

17 October, 2011

The Queensland Electrical Safety Office reminds workers and the general public to take extra care when in the vicinity of powerlines.


Surge protection - the what, how and why

30 September, 2011 | Supplied by: ERICO

There are various terms used to describe surge protective devices (SPDs), such as arrestors, lightning arrestors, surge arrestors, transient voltage surge suppressors (TVSS), surge diverters and surge protectors. The term surge filter or surge reduction filter usually refers to a series surge protector. However, all series-connected SPDs are not surge reduction filters. This article will explain the purpose and the operation of SPDs and the key selection criterion for selecting and specifying an SPD.


Wire By Click modular wiring solutions

23 September, 2011 | Supplied by: Wire By Click

Wire By Click’s modular wiring solutions have been factory tested to AU/NZ standards and are available in both 3 PIN and 5 PIN varieties. The quick-connect module is fitted to standard cable lengths to provide a soft wiring solution. The benefits include: saves time by eliminating terminations; provides a safer alternative to existing methods; achieves zero cable waste; and it presents an uncomplicated install with the assistance of colour-coded design drawings.


NECA calls for stronger safety regulations as housing stock ages

23 September, 2011 | Supplied by: NECA/National Electrical & Communications Association

Regulations to have safety switches installed at the time of sale or lease already exist in Western Australia and in Queensland and it is time the other states introduced these measures to help keep Australians safe, especially in older homes.


Banner Engineering TM18 EZ-Beam compact photoelectric sensor

21 September, 2011 | Supplied by: Micromax Pty Ltd

The Banner Engineering TM18 EZ-Beam compact photoelectric sensor features a nickel-plated, die-cast zinc metal housing, and epoxy encapsulated electronics. Rated IP69K, the sensor provides durability and resistance in harsh sensing environments, especially in high-pressure washdown applications. Featuring a compact, right-angle shape, an 18 mm threaded barrel mount and integral all-metal M12 quick disconnect, the sensor can fit in tight places and avoid damage during machine assembly, transport, maintenance and operation. It also offers improved immunity to electromagnetic noise and enhanced immunity to fluorescent lamps.


Schneider Electric Quick PRD surge protector

16 September, 2011 | Supplied by: Schneider Electric

The Quick PRD surge protector provides protection against induced or conducted surges resulting from indirect lighting strikes. The product features remote end-of-life signalling and requires limited maintenance. It is simple to install with an easy-to-earth terminal and it can be installed directly into the switchboard frame.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd