Legrand Viking terminal block range
01 September, 2009 | Supplied by: Legrand Australia P/L
Designed to ensure the electrical and mechanical connection of individual electrical wires, the Legrand Viking 3 is a comprehensive screw and spring terminal block range.
Load distribution module
01 September, 2009 | Supplied by: Benbro Electronics Pty Ltd
The Benbro Load Distribution module is designed for use with modular 300 series Eurocard DC-DC converter systems.
Liquid-tight cord-grips
31 August, 2009 | Supplied by: NPA Pty Ltd
The EMC metal liquid-tight cord-grips, manufactured by Heyco Products, are designed for use in applications where electromagnetic compatibility (EMC) is needed. Typical applications include wind power installations, electrical junction boxes, generators, telecommunications, instrumentation, computer peripherals and lighting.
LED beacons and strobe lights
31 August, 2009 | Supplied by: Flexible Drive Agencies
The ACOT500 range of LED beacons and strobe lights includes small and large beacons in a range of colours including amber, blue, magenta, white, red and green, and small, tall and large strobe beacons with selectable flash patterns.
Q08 uprox+ factor 1 proximity sensors
31 August, 2009 | Supplied by: Turck Australia Pty Ltd
The Q08 uprox+ factor 1 sensors, which are designed to detect steel, stainless steel, copper, brass and aluminium at the same rated sensing distance, now offer an extended range of 8 mm.
Supplying HV cable for mission-critical airport power
31 August, 2009 | Supplied by: World Wire Cables Australia Pty Ltd
When Downer Engineering installed kilometres of power cabling alongside the runway at Melbourne Airport, the mission-critical environment required the project to be completed within a very tight time frame, since minimal air-side disruptions could be tolerated. Likewise, Downer’s suppliers had to meet equally tight delivery schedules.
Cabling connector
28 August, 2009 | Supplied by: Harting (HK) Limited
The Han Q 8/0 contact insert is now equipped with the quick-to-assemble Han-Quick Lock termination technology, in addition to the existing crimp termination technology.
Coloured cable reticulation
28 August, 2009 | Supplied by: CMS Electracom Pty Ltd
CMS Cirqlate is a series of plastic disks specifically designed for assembly as cable reticulation and protection when bringing power and data cables from the floor or from the ceiling to the work surface.
Cordless hammer drill
28 August, 2009 | Supplied by: Hilti (Aust) Pty Ltd
The SFH 22-A cordless 18 V hammer drill/driver incorporates the latest Lithium-Ion ‘cordless power care’ battery technology to provide high-performance and long-lasting power needed to tackle a range of jobs efficiently.
Cable and pneumatic grommets
28 August, 2009 | Supplied by: Compressed Air Australia Pty Ltd
The Pipetite cable and pneumatic grommets are designed to seal air-line penetrations through sheet steel, such as in machine sides, solenoid panels and wall plates, while allowing for significant movement of the tube. They are suitable for use with pneumatic tube or electrical wires.
DTX-TERA adapter kit
12 August, 2009 | Supplied by: http://www.techrentals.com.au
The Fluke DTX Siemon Tera Adapter Kit is a fast, accurate way to certify Class F cabling systems to ISO standards using the TERA connector system.
Docking station connector
09 July, 2009 | Supplied by: Harting (HK) Limited
The Han-Modular docking frame enables a docking connector in the IP20 range to be set up without a housing, for use in insertion processes, such as racks in switch cabinets, that are not hand guided.
Switch cover plates
09 July, 2009 | Supplied by: Legrand Australia P/L
The Linea Soft-Touch cover plates are a series of coloured fascias that can be snapped onto the Linea GPOs and switch plates, maintaining their low 4 mm thick profile.
Cable bushings and grommets
09 July, 2009 | Supplied by: NPA Pty Ltd
The Heyco Products LabKit provides wire protection for cable entry points into prototype development of electrical and electronic systems and equipment.
Low harmonic drives
09 July, 2009 | Supplied by: Danfoss (Australia) Pty Ltd
The VLT low harmonic drive eliminates the harmonic disturbances on the supply grid by actively imposing currents into the grid so that the high-quality sine wave of the grid current is restored.
