Cerro Wire XLP insulated wire
15 September, 2011
The XHHW-2 cross-linked polyethylene (XLP) insulated copper conductors, with a SLiPWire jacket and True Sequential Footage, are suitable for use in conduit or other recognised raceways for service, feeder and branch circuit applications as specified in the NEC. It is also suitable for industrial applications where better insulation toughness and resistance to moisture and heat are required.
element14 parts available
14 September, 2011 | element14
element14 has increased its parts inventory to include over 14,000 electromechanical products for electronics design engineers and purchasing professionals across Asia-Pacific.
Dwyer Series CFS2 cable float switch
14 September, 2011 | Dwyer Omega (Aust) Pty Ltd
The Series CFS2 cable float switch is a mechanically actuated floating switch intended to activate electrical components, usually pumps, to start and stop automatically. The CFS2 is suitable for simple level control of liquids for filling or draining reservoirs and tanks.
HPM Legrand switches and socket outlets
14 September, 2011 | Legrand Australia P/L
The Excel Life range switches are suitable for all types of applications in residential and commercial projects. The range features new-generation electronic push-button switches and all load dimmers with customisable red or blue LED colour; internal safety shutters on all power points; all-in-one rotary switches; 770 module surge protection and time delay switch mechanisms, as well as unique 770 module LED ring kits.
Entrust mobile and soft-factor authentication program
14 September, 2011 | Entrust International LLC (Australia)
Entrust’s mobile and soft-factor authentication program will allow organisations that currently use a hard token-based solution to trade in the devices for the Entrust’s mobile and soft token factors of authentications in a one-for-one swap for up to 5000 users. The deadline to qualify for this promotion is 23 Dec 2011.
Hirschmann MACH104-16TX-PoEP ethernet switches
13 September, 2011 | Belden Australia Pty Ltd
The Hirschmann MACH104-16TX-PoEP ethernet switches enable increased power and speed over ethernet networks for IP cameras, VoIP phones and videoconferencing applications. The switches are in accordance with IEEE 802.3at standards. The switch can power 16 ports at 15.4 W or 8 ports at 30 W each, enabling users of industrial ethernet to take advantage of PoE devices.
Renesas PH5551A2NA1 illuminance sensor
13 September, 2011 | Braemac Pty Ltd
Renesas has released a digital ambient illuminance sensor, the PH5551A2NA1. The device is the company’s first entry into the market for these sensors and is designed to contribute to improved performance and reduced power consumption by automatically adjusting display brightness for the best viewing experience.
Omron Type FQ Series vision sensor
13 September, 2011 | Omron Electronics Pty Ltd
Omron’s Type FQ Series vision sensor incorporates full-blown image processing capabilities in a palm-size footprint.
Advantech ETM-RES02C touch control board
13 September, 2011 | Advantech Australia Pty Ltd
A touch control board, the ETM-RES02C, has been released for embedded developers.
Schroff 40G backplanes for AdvancedTCA
12 September, 2011 | Pentair
The Schroff 40G backplanes for AdvancedTCA provide higher data transfer rates to support next-generation processing requirements and to meet growing customer demand for higher data throughput, without increasing costs.
Energy Action online carbon tax calculator
12 September, 2011 | Energy Action
The online Energy Action Carbon Adjustment Calculator can approximate the cost impact of the new scheme on the energy bills of Australian businesses.
Lenox Speed Slot hole saw
12 September, 2011 | Lenox Tools
The Lenox Speed Slot hole saw has a specially designed slot that will help builders and tradesmen remove a plug faster than before. The Speed Slot design was developed in response to calls by building trade professionals who were becoming increasingly frustrated by the time and effort required to remove a plug from the hole saw. The Lenox hole saw is made with T2 technology, which gives a tougher cutting edge that is claimed to offer two times longer life drilling into metal and cut up to two times faster through wood.
Tektronix PXIe-5186 digitiser
12 September, 2011 | National Instruments Aust Pty Ltd
National Instruments has released what it claims is the highest bandwidth PXI digitiser, complementing the suite of instrumentation available in PXI.
Pilz PSENini safety proximity switch
12 September, 2011 | Pilz Australia Industrial Automation LP
The safety proximity switch PSENini from Pilz detects the approach of metallic objects without using contacts. Safe detection is provided even on multiple position applications - with long cams or rotational movements. The non-wearing technology is suitable for high switching frequencies.
Adlink ASD series solid state drives
12 September, 2011
The Adlink ASD series of SSDs provides optimised RAID support for higher data transfer rates and TRIM commands for reduced performance degradation. The series is available in 2.5”, 1.8” and JEDEC MO-297 (half-slim) form factors. Product features include low latency with less than 1 ms access time, power consumption of 2 W, high reliability and high storage capacity.
