Applied Infrared Sensing stereoscopic passive electro-optic radar
15 April, 2011 | Applied Infrared Sensing
Applied Infrared Sensing’s stereoscopic passive electro-optic radar, developed by Erez, is based on a stereoscopic video motion detection system that can provide an optical solution for perimeter protection.
StockCap heatshrink end caps
15 April, 2011 | StockCap
The range of StockCap heatshrink end caps is suitable for use with most common cable types including XLPE, PVC, PILC and rubber as well as jelly-filled and fibre-optic cables.
Megger MOM2 handheld microhmmeter
14 April, 2011 | Megger Limited
The MOM2 handheld microhmmeter can be used to measure the resistance of circuit breaker contacts, bus bars, connections and other links conducting high currents.
StockCap heatshrink cable breakout boots
14 April, 2011 | StockCap
The StockCap range of heatshrink cable breakout boots is suitable for use with most common low-voltage cable types including XLPE, rubber and PILC cables rated up to 1.1 kV. Sizes include 2-core boots with body/core dimensions 32/8-14/3 mm and 4-core boots of 41/16-14/4, 50/17-17/4 and 70/28-25/8 mm.
FLIR E-Series compact thermal imaging cameras
14 April, 2011 | Teledyne FLIR
The E-Series range of compact thermal imaging cameras with features like Wi-Fi and Bluetooth connectivity, touch screen and iPhone app can be used for predictive maintenance and building inspection.
Fluke Ti9 electrical/thermal imager
13 April, 2011 | Fluke Australia Pty Ltd
The rugged Ti9 electrical/thermal imager can be used to detect problems in a wide range of equipment including switchgear, motor control centres and lighting systems. It can also be used to extend equipment lifetime, avoid electrical fires, and validate installation, repair and maintenance procedures.
Fujikura FSM60S splicer and CT30 cleaver
11 April, 2011 | TechRentals
The Fujikura FSM60S splicer and CT30 cleaver are now available to rent.
Spirent TestCenter HyperMetrics NeXt testing module
07 April, 2011 | Matrium Technologies Pty Ltd
The Spirent TestCenter HyperMetrics NeXt testing module enables carriers and network vendors to test networks, data and applications on mobile internet.
Spirent Communications SPT-9000A TestCenter
01 April, 2011 | TechRentals
Available to rent, the Spirent Communications SPT-9000A TestCenter is a network performance analysis system with both software and hardware components that condense the testing process and increase productivity for 10 Mbps to 100 Gbps networks.
Fluke DTX-MFM2 multimode fibre adapter
01 April, 2011 | TechRentals
Available to rent, the Fluke DTX-MFM2 multimode fibre module serves as an adapter for the Fluke DTX cable analyser. It measures optical power loss, length and propagation delay for multimode fibres when testing fibre installations in local area networks and data centres.
ERICO MP1WWM within-wall mounting plate
30 March, 2011 | nVent Australia
The MP1WWM within-wall mounting plate can be used for installing low-voltage cable, phone and data lines on plasterboard or drywall.
ERICO TSGB telescopic screw gun bracket
29 March, 2011 | nVent Australia
The TSGB telescopic screw gun bracket, part of the Caddy line of fixings, fasteners and supports, features a one-piece, break-apart design. It is suitable for lighter-duty applications and makes mounting multiple runs of pipe, conduit or electrical boxes easier. The pilot holes allow precise mounting anywhere between wall studs, not just by the wall stud.
IECI RSM-8Rx series console management switch with remote power reboot
28 March, 2011 | Interworld Electronics and Computer Industries
The RSM-8Rx series console management switch provides secure remote access to RS232 console ports and the ability to power cycle remote IT equipment. Two models are available: RSM-8R4 providing eight RJ45 serial ports and four IEC reboot power outlets, and RSM-8R8 that provides eight RJ45 serial ports and eight reboot power outlets.
Eaton 3S UPS
27 March, 2011 | Eaton Corporation
The 3S UPS is designed for small office and point-of-sale applications. An all-in-one UPS, surge suppressor and power board, it can save up to a claimed 30% of power consumed by idle peripherals. It provides plug-and-play power and surge protection to computers, gaming consoles and audio-video equipment.
Yamasaki TP40 FiberSeek PON fibre-optic power meter
26 March, 2011 | Anderson Corporation Pty Ltd
The Yamasaki TP40 FiberSeek PON fibre-optic power meter for testing in the FTTx environment simultaneously measures the PON signals of 1310, 1490, 1550 nm with 1310 nm wavelength upstream burst mode for communication with the ONT. For the fibre-to-the-home, it uses the signal pass through for minimal disruption for customers.
