Strain gauge signal conditioner
09 July, 2009 | Weidmuller Pty Ltd
The ACT20P-Bridge strain gauge signal conditioner and isolator provides four switch-selectable input ranges of 0 to ±10, 20, 30 and 50 mV and proportional analog output of between 0-22 mA with loads of <600 Ω, and 0-11 V with loads >1 kΩ. Accuracy is claimed as being better than 0.05%, with a temperature drift of better that 50 ppm over the range of -40 to +70 °C.
HDMI signal distribution
09 July, 2009 | Midwich Australia
Obonok Technology’s Blu-Wire series T1 transmitter and R1 receiver have been updated, providing reduced signal-noise performance for HDMI signal transmission over category 6/5e UTP cable.
Touch-panel industrial PC
09 July, 2009 | Cutter Electronics
The OTP/57V compact touch-panel PC, manufactured by SSV, is designed to suit HMI installations where limited mounting space is available.
Watertight enclosures
09 July, 2009 | Hammond Electronics Pty Ltd
The 1457 extruded aluminium family of small enclosures has been expanded with the introduction of RFI-screened IP54 environmentally sealed versions. The 1457 E series is designed to house PCBs and small electronic, electrical or pneumatic components.
Cable bushings and grommets
09 July, 2009 | NPA Pty Ltd
The Heyco Products LabKit provides wire protection for cable entry points into prototype development of electrical and electronic systems and equipment.
Docking station connector
09 July, 2009 | Harting (HK) Limited
The Han-Modular docking frame enables a docking connector in the IP20 range to be set up without a housing, for use in insertion processes, such as racks in switch cabinets, that are not hand guided.
Weatherproof T8 battens
09 July, 2009 | Osram Australia Pty Ltd
The Neptune ‘Fit & Forget’ series weatherproof fluorescent lighting battens are designed for long life and low maintenance, utilising the Osram Lumilux XXT T8 lamp with a claimed lamp life of up to 75,000 h.
Category 6 UTP cable
09 July, 2009 | Belden Australia Pty Ltd
The DataTwist 3600 series of category 6 UTP copper cables consists of four pairs of 23 AWG insulated copper conductors with a round flexible core construction and a central spline that maintains pair separation and matched conductors on all four pairs.Â
Industrial category 6 UTP cable
09 July, 2009 | Belden Australia Pty Ltd
The DataTuff 7940A category 6 UTP industrial ethernet cable is EtherNet/IP compliant and designed for high-speed data transmission.
Halogen heaters
09 July, 2009 | Thorn Lighting Pty Limited
Silver halogen heaters create directed heat efficiently in a single, self-contained fitting, making them suited to a wide range of environments.
Secure IT enclosure
09 July, 2009 | Rittal Pty Ltd
The Lampertz LMS 9.3 modular safe provides physical protection for 19-inch racks on a surface of only 1 m2 and users also benefit from complete protection of server racks against physical threats.
Remote I/O adapter
09 July, 2009 | Micromax Pty Ltd
The Unitronics EX-RC1 remote I/O adapter allows multiple adapters to connect to a single PLC, with up to eight standard expansion modules to each adapter via CANbus.
Data centre power consumption monitors
09 July, 2009 | Interworld Electronics and Computer Industries
The WTI BPM and MPC series rack mount power distribution units (PDUs) meter and report total kWh energy consumption, enabling users to know how much the IT equipment contributes to the data centre utility bill.
Enclosure guide
09 July, 2009 | Pentair
The Hoffman Specifier’s Guide volume 22 is a comprehensive resource for its 11,000+ products and accessories, and technical information. The guide features streamlined content for easy navigation and quick product location.
Fibre-optic splice outlet
09 July, 2009 | Reichle & De-Massari Australia P/L
The FO splice outlet enables simple installation of fibre-optic cabling into residential and commercial buildings, allowing FTTx broadband to be extended into individual rooms for the delivery of internet TV, multimedia and high-capacity data transmission.
