Fire-rated downlights
27 July, 2009 | Adaptaflex Pty Ltd
The JCC Fireguard range of fire-rated downlights is designed for commercial and domestic applications and meets the relevant Australian building regulations, having been tested to meet AS1530.4-2005 — the fire-resistant test of downlights penetrating a floor ceiling system.
Industrial ethernet user guide
09 July, 2009 | Belden Australia Pty Ltd
BeldenÂ’s industrial ethernet user guide is a 16-page brochure that offers specific information about the performance differences between commercial off-the-shelf (COTS) ethernet components typically used in office environments and rugged industrial-grade components.
Philips Dynalite DIR-TX8 infrared transmitter
09 July, 2009 | Philips Dynalite
The DIR-TX8 infrared transmitter is designed to provide cost-effective integration and control of all types of infrared-controllable devices, such as AV equipment.
Touch-panel industrial PC
09 July, 2009 | Cutter Electronics
The OTP/57V compact touch-panel PC, manufactured by SSV, is designed to suit HMI installations where limited mounting space is available.
Docking station connector
09 July, 2009 | Harting (HK) Limited
The Han-Modular docking frame enables a docking connector in the IP20 range to be set up without a housing, for use in insertion processes, such as racks in switch cabinets, that are not hand guided.
Industrial category 6 UTP cable
09 July, 2009 | Belden Australia Pty Ltd
The DataTuff 7940A category 6 UTP industrial ethernet cable is EtherNet/IP compliant and designed for high-speed data transmission.
Weatherproof T8 battens
09 July, 2009 | Osram Australia Pty Ltd
The Neptune ‘Fit & Forget’ series weatherproof fluorescent lighting battens are designed for long life and low maintenance, utilising the Osram Lumilux XXT T8 lamp with a claimed lamp life of up to 75,000 h.
Cable bushings and grommets
09 July, 2009 | NPA Pty Ltd
The Heyco Products LabKit provides wire protection for cable entry points into prototype development of electrical and electronic systems and equipment.
Category 6 UTP cable
09 July, 2009 | Belden Australia Pty Ltd
The DataTwist 3600 series of category 6 UTP copper cables consists of four pairs of 23 AWG insulated copper conductors with a round flexible core construction and a central spline that maintains pair separation and matched conductors on all four pairs.Â
Strain gauge signal conditioner
09 July, 2009 | Weidmuller Pty Ltd
The ACT20P-Bridge strain gauge signal conditioner and isolator provides four switch-selectable input ranges of 0 to ±10, 20, 30 and 50 mV and proportional analog output of between 0-22 mA with loads of <600 Ω, and 0-11 V with loads >1 kΩ. Accuracy is claimed as being better than 0.05%, with a temperature drift of better that 50 ppm over the range of -40 to +70 °C.
Watertight enclosures
09 July, 2009 | Hammond Electronics Pty Ltd
The 1457 extruded aluminium family of small enclosures has been expanded with the introduction of RFI-screened IP54 environmentally sealed versions. The 1457 E series is designed to house PCBs and small electronic, electrical or pneumatic components.
HDMI signal distribution
09 July, 2009 | Midwich Australia
Obonok Technology’s Blu-Wire series T1 transmitter and R1 receiver have been updated, providing reduced signal-noise performance for HDMI signal transmission over category 6/5e UTP cable.
Halogen heaters
09 July, 2009 | Thorn Lighting Pty Limited
Silver halogen heaters create directed heat efficiently in a single, self-contained fitting, making them suited to a wide range of environments.
Secure IT enclosure
09 July, 2009 | Rittal Pty Ltd
The Lampertz LMS 9.3 modular safe provides physical protection for 19-inch racks on a surface of only 1 m2 and users also benefit from complete protection of server racks against physical threats.
Remote I/O adapter
09 July, 2009 | Micromax Pty Ltd
The Unitronics EX-RC1 remote I/O adapter allows multiple adapters to connect to a single PLC, with up to eight standard expansion modules to each adapter via CANbus.
