EX600 series true RMS clamp meters
03 February, 2009 | Teledyne FLIR
The EX600 series of true RMS clamp meters features an IR thermometer for locating hot spots and NCV, making it an all-in-one solution for both electrical and HVAC professionals.
Audio lead tester
03 February, 2009 | Soundcorp Pty Limited
The Quest LT01 cable tester is designed to test for polarity (phase reversal) and continuity in a variety of analog and digital audio leads and cables.
Industrial gigabit ethernet switch
03 February, 2009 | CrispTech Pty Ltd
The Moxa EDS-G509 is an industrial ethernet switch that support up to nine gigabit ethernet ports with five fibre-optic ports. It is designed for installation in harsh industrial environments, able to operate in temperature extremes ranging from -40 to 75 °C and supported by 12/24/48 VDC or 24 VAC redundant dual power inputs.
Video surveillance data enclosure
03 February, 2009 | Rittal Pty Ltd
The Rittal security box enclosure is a tamper-proof security enclosure aimed at helping organisations protect their video surveillance equipment from unauthorised access.
GX10 lamp holder
03 February, 2009 | Soanar Limited
The 25.835 GX10 lamp holder from BJB is designed for use with HID lamps, typically installed in retail premises, exhibition areas and other types of architectural lighting.
SDR-240 DIN rail power supplies
03 February, 2009 | ADM Instrument Engineering Group
The SDR-240 is the first model in the Meanwell Slim DIN rail product series of DIN rail power supplies. The slim design of 63.5 mm in width saves space on the rail and makes it 42% smaller in size in comparison to its predecessor model.
Rack-mountable hot air exhaust system
03 February, 2009 | LeisureTech Electronics Pty Ltd
The Cool-Stack III, manufactured by Active Thermal Management, is a rack-mountable one-unit high hot air exhaust system that utilises four 120 mm fans that are claimed to pull up to 70 cfm of hot air out from tightly packed racks, while generating low noise levels of 26 dB. Heated air is exhausted through the perforated front panel, or exhaust fittings and tubing provided with the unit, to move hot air away from a cabinet.
Data wall plate
03 February, 2009 | CommScope Technologies Australia Pty Ltd
The CopperTen 3-port Faceplate has been specifically designed to meet the performance requirements of 10 Gb ethernet applications, by spacing the outlets sufficiently distant from each other to minimise the impact of alien crosstalk at the outlet.
Embedded controller
03 February, 2009 | Siemens Ltd
The Simatic S7-mEC embedded controller and EM PC and EM PCI-104 expansion modules facilitate the connection of Simatic S7 to PCs.
Cable certification and ethernet tester software
03 February, 2009 | Keysight Technologies Australia Pty Ltd
An advanced network test option for the WireScope Pro cable certification tester has been released for the validation and pre-qualification of voice over IP services and to stress test ethernet connections.
Data equipment cabinet
03 February, 2009 | M Rutty & Co Pty Ltd
SmartRack is a multipurpose equipment cabinet that allows for 19", metric and wider ETSI sized equipment to be fitted in the one rack.
Intrinsically safe transceiver
03 February, 2009 | Micromax Pty Ltd
The Banner Engineering DX99 wireless transceiver node is designed for installation in hazardous areas and combines three technologies in a single housing: battery-based power supply, wireless technology for mission critical data and intrinsically safe operation.
Large-scale power board
03 February, 2009 | Jackson Industries
The PT8282 is a 2 m long power board that contains 10 mains outlets that are spaced 200 mm apart to enable devices, including plug packs and chargers, to be connected to mains supply.
Earth leakage circuit breaker
03 February, 2009 | NHP Electrical Engineering Products Pty Ltd
The Terasaki ZS earth leakage moulded case circuit breaker (MCCB) offers machine or personnel protection within a standard 125 A, 160/250 A MCCB frame size. The MCCB maintains the functionality of a standard thermal-magnetic overload/short-circuit protection device.
Single-sided fibreglass ladders
03 February, 2009 | CABAC
The Cablad single-sided fibreglass ladders are available in three models, varying in height from 1.5 to 2.4 m, and are manufactured in high-visibility yellow fibreglass.
