Bosch VIP X1600 XF series of IP video encoder modules
16 December, 2009 byThe VIP X1600 XF series of IP video encoder modules is designed to meet the increasing demand for better images with less demand on network and storage resources, in combination with ‘intelligence at the edge’, where video analysis is pushed to the edge of a network to save system resources.
Bosch Dinion 2X Day/Night fixed and Flexidome 2X Day/Night dome cameras
16 December, 2009 byThe Dinion 2X Day/Night fixed and Flexidome 2X Day/Night dome cameras combine a wide dynamic range CCD sensor with 20-bit digital signal processing to deliver high-detail reproduction and image quality in low-light conditions for surveillance applications, such as outdoor perimeters, traffic monitoring, car parks and gaming centres.
CCTV recorder
28 August, 2009 byThe Divar XF H.264 hybrid CCTV recorder supports real-time, high-quality video in H.264 compression on a total of 24 channels, with up to eight H.264 IP cameras and RAID-4 storage to prevent loss of video when a single hard disk fails.
Digital CCTV recorder
09 July, 2009 byThe Divar XF digital CCTV recorder is equipped with four front-replaceable HD drives and extensive integration capabilities.
IP video surveillance cameras
01 November, 2008The Leutron Vision PicSight gigabit ethernet and smart cameras are now fitted with an integrated socket enabling motorised lenses with ‘C’ or ‘CS’ mountings to be connected directly to them, providing fully automated lens control for high-resolution video surveillance and industrial cameras with sensors.
Industrial imaging cameras
01 October, 2008Dalsa has released two models of its Genie GigE vision-compliant camera family. The Genie C1410 and Genie M1410 cameras feature a 1.7 cm sensor and are suitable for industrial imaging applications in a wide range of applications.
Embeddable presence sensors
01 August, 2008The Banner Engineering M-GAGE wireless sensor node for vehicle sensing is encapsulated in an IP67-rated enclosure and accompanied by a long-lasting FlexPower battery, which supplies power for both sensing and wireless connectivity for up to 10 years.
New intruder alarm and CCTV standards
23 July, 2008SAI Global has released the latest intruder alarm and CCTV Australian Standards — AS/NZS 2201.5:2008 'Intruder alarm systems — Alarm transmission systems’ and AS 4806.4 — 2008 ‘Closed circuit television (CCTV) — Remote video’.
Video intercom
01 July, 2008The Siedle Vario in-home video intercom system bus can now perform functions previously only available using high-end intercom installation system.
Video intrusion detection
01 June, 2008MotionViewer is a wireless video intrusion detection system designed for use in homes and small and medium businesses such as warehouses, construction sites, retail shops and small commercial areas.
ThermoVision A320 Infrared camera
01 April, 2008The compact ThermoVision A320 series can be installed discreetly and almost anywhere to monitor your business. It will keep an infrared eye on your production process, safeguard production plants and assets and measure temperature developments that enable you to assess the situation.
Security camera
01 April, 2008The Fork-Cam is an industrial CCTV system that was designed from the outset for use in heavy industrial applications.
Digital to analog video decoder
01 February, 2008The Moxa VPort D351 is a single-channel industrial video decoder that can decode MJPEG and MPEG-4 network video and audio streams from video encoders and IP cameras and then send the analog signals back to traditional CCTV equipment.
Security installation software
01 February, 2008The Texecom Wintex software has been designed for use with the Premier series of video surveillance control panels, providing upload/download and system diagnostics for both hard-wired and wireless video systems.
Networked cameras
01 February, 2008The Leutron Vision PicSight cameras and PicPort frame grabbers feature Power-over-CameraLink (PoCL), where the power supply to the camera is provided directly via the data cable, negating the need for an additional separate power-supply cable or unit, saving installation time and costs.
