ComNet 1000FX fibre-optic media converter
07 November, 2011 | Supplied by: ComNet Europe Ltd
The 1000FX fibre-optic media converter with Power over Ethernet (PoE) supports the latest IEEE 802.3at PoE standard for power sourcing equipment (PSE), supplying up to 25 W of power.
ABB Instrumentation motor and gear unit packages
04 November, 2011 | Supplied by: ABB Instrumentation
ABB’s motor and gear unit packages enable robot integrators to create custom solutions for workpiece positioners, robot carriers, track motions, servo guns and indexing conveyers. The motor and gear units are designed to optimise cost efficiency and performance and to simplify integration and operation.
First 400G network processor tested with Spirent’s high-speed ethernet test solution
01 October, 2011 | Supplied by: Matrium Technologies Pty Ltd
Alcatel-Lucent has used Spirent TestCenter HyperMetrics mX 40/100G to validate the scale and performance of its FP3 Processor in initial public demonstrations.
ETM Pacific ETM350C industrial 3G ethernet router
26 September, 2011 | Supplied by: ETM Pacific Pty Ltd
The ETM350C industrial 3G ethernet router with HSDPA 3.6 Mbit DL and 384 Kbit UL and an operating temperature range of -20 to +60°C is suitable for remote industrial applications such as metering, data logging, backup communications, security and telemetry.
Molex PowerCat 6A side-entry shielded jacks
22 September, 2011 | Supplied by: Molex Premise Networks Pty Ltd
The PowerCat 6A side-entry shielded jacks are suitable for use in work area outlet applications with limited back box space and trunking applications. The jack also incorporates installation features such as a spring-loaded cable clamp feature and will be compatible with the Molex 4-pair termination tool and standard termination tool. The jack is specifically designed for high-speed 10 gigabit ethernet applications, with typical applications including data centres, storage area networks, server farms, riser backbones and beyond. It consists of Category 6A shielded patch panels, both straight and angled, cable, patch cords and the both the new die-cast Datagate side-entry and regular shielded 6A jack. The solution is suitable for business enterprises looking to secure network performance for the future.
Exfo FTB-860G NetBlazer 10G ethernet tester
19 September, 2011 | Supplied by: TechRentals
Available to rent, the Exfo FTB-860G NetBlazer 10G ethernet tester allows field technicians to perform RFC 2544 measurements and EtherSAM (ITU-T Y.156sam) for turnkey deployment, validation and troubleshooting of 10 Gbps access and metro ethernet services with ease in any environment.
ICP Electronics t(P)ET-P2R2/tET-P2R2 monitoring and control module
16 September, 2011 | Supplied by: ICP Electronics Australia
The t(P)ET-P2R2/tET-P2R2 is an IP-based tiny ethernet I/O monitoring and control module that can be remotely controlled through a 10/100M ethernet network by using Modbus TCP/UDP protocol. This makes the device suitable for integrating into the HMI, SCADA, PLC and other software systems.
Advantech ETM-RES02C touch control board
13 September, 2011 | Supplied by: Advantech Australia Pty Ltd
A touch control board, the ETM-RES02C, has been released for embedded developers.
Adlink ASD series solid state drives
12 September, 2011 | Supplied by: http://www.adlinktech.com/
The Adlink ASD series of SSDs provides optimised RAID support for higher data transfer rates and TRIM commands for reduced performance degradation. The series is available in 2.5”, 1.8” and JEDEC MO-297 (half-slim) form factors. Product features include low latency with less than 1 ms access time, power consumption of 2 W, high reliability and high storage capacity.
Allen-Bradley Micro800 controllers and software
29 August, 2011 | Supplied by: Rockwell Automation Australia
The Allen-Bradley Micro800 controllers and connected components workbench (CCW) software offer fully customisable solutions for nano- and microlevel controller applications. The products are suitable for machine builders and end users who need a cost-effective control solution for their small applications.
Lovato Kinco smart relay PLCs
26 August, 2011 | Supplied by: Mechtric Pty Ltd
The Lovato Kinco series of smart relay programmable logic controllers (PLCs) allows the replacement of different traditional control devices such as timers, counters, relays and hour meters into one compact and adaptable device.
Fantech EC series JetVent fans
22 July, 2011 | Supplied by: Fantech Pty Ltd
The Electronic Commutation (EC) series of JetVent fans has pushed forward energy efficiency in car park ventilation. The brushless DC technology used in the EC motor combined with integrated speed control could reduce noise and lead to massive power savings. At high speed (25.8 r/s), the installed EC fan has a throw distance of 55 m.
Unitronix fanless, low-power panel PC
12 July, 2011 | Supplied by: Unitronix Pty Ltd
The PPC-1571, a fanless and low-power panel PC, containing a 15″ LCD, is a PC/display solution in home or industry. The PC realises abundant I/O connectors in an ultraslim structure. Therefore, it can be applied in applications with strict requirements for appearance and dimensions, such as plastic mechanisms, testing devices and home automation among others.
Irwin Tools Marathon circular saw blade with WeldTec
11 July, 2011 | Supplied by: Irwin Tools
The Marathon circular saw blade with WeldTec technology features the welding of the carbide tooth to the blade as opposed to the traditional brazing process.
Unitronix fanless box PC
11 July, 2011 | Supplied by: Unitronix Pty Ltd
Suitable for either domestic or industrial automation applications, the MEC-4005 is a fanless, low-power, high-performance embedded box PC.
