Clipsal Medium Power Universal Dimmer
04 October, 2012 | Supplied by: Clipsal Australia Pty LtdThe Medium Power Universal Dimmer from Clipsal is rated at 800 W and designed for universal load compatibility. The unit utilises sophisticated dimming technology to provide full control of a wide range of load types, including small motor loads such as ceilings and exhaust fans.
Weidmuller metal marking system
04 October, 2012 | Supplied by: Weidmuller Pty LtdWeidmuller has released a system for creating aluminium and stainless steel markers for use in and around electrical cabinets, as well as to tag cables.
Littelfuse circuit protection product range
19 September, 2012 | Supplied by: element14element14 Australia offers more than 4000 lines of Littelfuse circuit protection products, suitable for circuit protection in electronics, automotive and industrial applications.
Festo OGGB low-contact gripper
17 September, 2012 | Supplied by: Festo Pty LtdThe low-contact gripper OGGB from Festo is used for handling highly sensitive solar cells and other fragile items. The gripper transports thin, flexible workpieces with the help of the Bernoulli principle.
CMS Electracom SW18 Series service outlet
10 September, 2012 | Supplied by: CMS Electracom Pty LtdThe SW18 Series 10 A double pole auto-switched outlet from CMS Electracom integrates soft wiring couplers into the moulding. The connectors, complete with moulded latches, comply to AS/NZ61535.1:2003 and IP4X, so there is no requirement to use safety end caps or tool-only removable connectors.
igus micro flizz MF10 energy chain
06 September, 2012 | Supplied by: Treotham Automation Pty LtdThe igus micro flizz MF10 energy chain allows even cable diameters up to 16 mm with bending radii up to 75 mm to be routed compactly.
Caterpillar Critical Protection Module UPS system
04 September, 2012 | Supplied by: Caterpillar of Australia LtdThe Caterpillar CPM is a UPS system that combines a CAT Flywheel UPS, CAT diesel generator and an Automatic Transfer Switch in a sound-attenuated and factory-tested ISO standard container.
O’Donnell Griffin’s LV installation for Melbourne Water
03 September, 2012 | Supplied by: O'Donnell GriffinFollowing 13 months of critical execution to keep complete functionality of Melbourne Water’s Eastern Treatment Plant that processes more than 52% of Melbourne’s waste water, engineering solutions provider O’Donnell Griffin completed the electrical works component of the wet weather upgrade project.
Schneider Phaseo ABL4 Regulated switchmode power supplies
03 September, 2012 | Supplied by: Clipsal - by Schneider ElectricThe Schneider Electric Phaseo ABL4 range of single- and three-phase power supplies for industrial machines provides reliability of operation with continuous protection against output overload, voltage surges generated on the output through switching inductive loads and against abnormal rises in ambient temperature.
Wieland-Electric gesis IP+ connector system
21 August, 2012 | Supplied by: DKSH Australia Pty LtdThe gesis IP+ connector system - RST 20i3 and RST20i5 - from Wieland-Electric provides error-free contact up to IP68, even in unfavourable environmental conditions.
NHP Grizz-Bar isolation chassis
17 August, 2012 | Supplied by: NHP Electrical Engineering Products Pty LtdThe NHP Grizz-Bar isolation chassis has been designed for data centres, hospitals and other applications that require maximum uptime from their power distribution system.
4Cabling cable box
15 August, 2012 | Supplied by: 4Cabling Pty LtdThe 4Cabling cable box hides cable disorder in small-scale projects requiring 6- to 8-way power boards.
Eaton E Series enclosure for small to medium data centres
14 August, 2012 | Supplied by: Eaton Electrical (Australia) Pty LtdEaton Corporation has extended its range of racks designed for data centre environments with the Eaton E Series enclosure.
ITT Cannon Trinity MKJ series miniature circular connectors
14 August, 2012 | Supplied by: Connector-Tech ALS Pty LtdThe Trinity MKJ family of miniature circular connectors is claimed to provide approximate characteristics of larger and heavier Military Standard Environmental connectors while reducing weight and size.
SolidWorks Electrical applications design tools for electrical systems
13 August, 2012 | Supplied by: Dassault SystèmesThe SolidWorks Electrical applications include a systems-level 2D schematic design tool and a powerful 3D electrical modelling add-in to SolidWorks design application that are linked in real time.
