Hendrix Dual Block for underground cable
31 August, 2010 | Supplied by: Bri-Tech Pty Ltd
The Hendrix Wire & Cable Dual Block provides dual water blocking capability for underground cable installations.
Mean Well TN/TS-3000 series DC/AC true sine wave inverters
31 August, 2010 | Supplied by: Soanar Limited
The Mean Well TN/TS-3000 series DC/AC true sine wave inverters are lightweight and have a claimed efficiency of up to 92%. They can provide 3000 W continuously, 3450 W for 3 min, 4500 W for 10 s, or 6000 W surge power for 30 utility cycles.
Joran Speedhammer Power masonry drill bits
31 August, 2010 | Supplied by: Irwin Tools
The Joran Speedhammer Power masonry drill bits range is designed to provide quality drilling performance through standard and reinforced concrete, while reducing bit breakages.
DEHN + SOHNE Blitzductor XT lightning current and surge arrester
31 August, 2010 | Supplied by: DEHN + SOHNE GmbH + Co KG
The Blitzductor XT pluggable combined lightning current and surge arrester is designed for four signal wires and features three arrester modules that protect the Dupline Bus of devices with protective diode circuits at the input and bus systems in Ex zone 1.
Gas Alarm Systems VEFSA (very early fire detection and safety alarm)
31 August, 2010 | Supplied by: Gas Alarm Systems
VEFSA (very early fire detection and safety alarm) is designed to detect mixed gases generated due to electrical overload, electrical short-circuit or overheating in power station substations, electrical panels, data centres and telecom rooms, including UPS battery rooms.
Telehook TH-3060-LPF slim TV mounting
31 August, 2010 | Supplied by: Atdec Pty Ltd
The Telehook TH-3060-LPF slim TV mounting positions a slim LED or LCD TV 14 mm from the wall.
DEHN + SOHNE DEHNguard M YPV SCI 600, M YPV SCI 1200 surge arresters
31 August, 2010 | Supplied by: DEHN + SOHNE GmbH + Co KG
The DEHNguard M YPV SCI 600 and M YPV SCI 1200 are UL-approved surge protection devices, designed to offer safety and protection for photovoltaic (PV) installations.
HPM Legrand electronic push-button switch
31 August, 2010 | Supplied by: Legrand Australia P/L
HPM Legrand is expanding the range of push-button mechanisms with a sleek 240 V electronic push-button switch, suitable for residential or commercial projects.
ILME thermoplastic enclosures
31 August, 2010 | Supplied by: Treotham Automation Pty Ltd
ILME enclosures are made from a self-extinguishing thermoplastic material in the most common industry sizes of 44.27, 57.27, 77.27 and 104.27.
igus continually rotating energy chain
31 August, 2010 | Supplied by: Treotham Automation Pty Ltd
The igus continually rotating energy chain is a ready-to-install module that features lightweight and reliable chains, with speeds of up to 8 m/s allowing fast machine cycle times to be realised.
SEW-Eurodrive DUV30A vibration analysis sensor
31 August, 2010 | Supplied by: SEW-Eurodrive Pty Ltd
The DUV30A vibration analysis sensor replaces the DUV10A, providing faster sampling times at a constant speed and allowing the monitoring of more dynamic gear-unit applications. It enables gear-unit maintenance planning, as the sensor allows the early detection of roller bearing and gearing wear and damage, as well as gear-unit unbalance and resonance detection.
Developing new insulators using nanoparticles
31 August, 2010
Siemens is searching for new technologies for use as insulators on electrical wiring that will make generators more efficient.
Conduit developments in hazardous areas
10 August, 2010 by Phil Winship* | Supplied by: Adaptaflex Pty Ltd
New developments in metallic and nonmetallic conduits provide cost-effective alternatives for installing electrical and communications cabling in hazardous areas.
Fitel S178 fusion splicer and S325 cleaver
05 August, 2010 | Supplied by: TechRentals
The Fitel S178 fusion splicer and S325 cleaver are now available to rent.
Is power protection costing more than it should?
05 August, 2010 | Supplied by: Eaton Electrical (Australia) Pty Ltd
All electronics in an organisation - from desktops to data centres - require continuous, clean power. Anything less puts businesses at risk of data corruption, equipment damage and unplanned downtime. Most organisations meet this requirement by having a central UPS that serves an entire building/data centre, or distributed UPSs placed closer to the equipment being protected, or both.
