Fluke 2042 professional general-purpose cable locator
17 May, 2010The Fluke 2042 professional general-purpose cable locator is now available to rent. It is suitable for tracing cables in walls and underground, locating interruptions, fuses/breakers on final circuits and for tracing metallic water and heating pipes.
HT Italia HT7021 industrial digital clamp meter
14 May, 2010 byThe HT Italia HT7021 professional clamp is designed for DC/AC TRMS current measurement up to 1000A. The model has a large LCD 3¾ display (4000 counts), with backlight and bargraph.
HT Italia HT7011 fork-type clamp meter
14 May, 2010 byThe HT Italia HT7011 clamp meter has been designed for AC current measurement up to 200 A with an open clamp design.
HT Italia HT712 TRMS pen multifunction digital meter
14 May, 2010 byThe HT Italia HT712 multimeter is designed for the electrical installation sector. AC voltage measurement can be performed with the 1-wire system which allows easy measurements with one hand only. It also performs 1-wire phase sequence and phase conformity testing using the red test probe by simply touching the insulated part of the wire. The green or red LED illuminates indicating a positive (OK) or negative (fail) result.
AEMC Instruments Simple Logger II Model L481
06 May, 2010 byThe Simple Logger II Model L481 is a bipolar 850 VDC data logger that offers a choice of data storage modes and storage rates, allowing operators to configure the logger to optimise memory usage for the application at hand.
Power Parameters Ponovo PM 605A multi-function calibrator
22 April, 2010 byThe Ponovo PM 605A multi-function calibrator is designed for use on three- and single-phase circuits and instruments as well as DC devices. It is suitable for AC and DC voltage, current, frequency, phase angle, power factor and power, with options available to calibrate revenue meters.
Fluke 233 wireless remote display digital multimeter
22 April, 2010 byThe Fluke 233 wireless remote display digital multimeter features a removable magnetic display that allows users to be 10 m away from the measurement point - helpful for difficult measurements where display viewing is challenging - using low-power wireless technology that is not susceptible to interference.
Yokogawa GS200 programmable DC voltage/current source
22 April, 2010 byThe GS200 programmable DC voltage/current source generates low-noise DC voltage and current signals for a range of device driving and testing applications, while an optional monitoring feature turns it into a voltage and current measuring instrument.
Megger TDR 2000
22 April, 2010The Megger TDR 2000 is available for rental from TechRentals to perform single- and dual-channel measurements on a wide range of metallic cables.
Omicron CPC 100 PTS protection relay testing system
11 March, 2010The Omicron CPC 100 protection relay testing system, now available for rent, is a suitable instrument for automated testing of power transformers, current transformers (CTs) and voltage transformers (VTs) and resistance testing.
Megger FRAX sweep frequency response analysers
19 February, 2010 byThe FRAX sweep frequency response analyser reveals potential electrical and mechanical problems in power transformers, many of which are not detectable using other methods.
Megger MTO210 dual-channel ohmmeter
19 February, 2010The MTO210 transformer ohmmeter safely and accurately measures the DC resistance of all types of magnetic windings in on-site and workshop situations. It can also be used to check the operation of on-load tap changers, a common cause of transformer problems.
AEMC Instruments Simple Logger II Model ML912
05 February, 2010 byThe Simple Logger II Model ML912 is a two-channel, AC current recording device that incorporates two user-selectable measurement ranges of 0.5-100 and 5-1000 A.
Emona Instruments CableEye cable test systems
05 February, 2010 byThe CableEye range of PC-based cable test systems, from CAMI Research, covers basic electrical continuity measurement, continuity measurement with resistance and high-voltage testing.
The smart buyer’s guide to test and measurement equipment
01 December, 2009Unfortunately, many people base their test and measurement equipment purchasing decision on price, availability and misleading sales information.
