SATEC PM135EH smart energy metering
19 November, 2013SATEC (Australia) has released the PM135EH as a further extension of its smart energy metering capabilities. The PM135EH offers multifunction measuring capabilities for a broad range of electrical parameters including Energy measuring accuracy of Class 0.5s.
Megger MOM2 lightweight digital low resistance ohmmeter (DLRO)
08 October, 2013The Megger MOM2 lightweight digital low resistance ohmmeter (DLRO), available to rent from TechRentals, is suitable for HV test engineers on the go.
Fluke 5730A multifunction calibrator
27 September, 2013The 5730A is designed for calibration professionals who require the most accurate DC/low-frequency signals available in a multifunction calibrator.
Weidmuller KLBU RC shield clamp
24 July, 2013The Weidmuller KLBU RC shield clamp discharges interference currents. The built-in frequency filter in the shield clamp prevents high-frequency noise from being transferred across the cable. It effectively suppresses interfering currents to help ensure a more effective and responsive system.
Anritsu MT9083B ACCESS Master OTDR
02 July, 2013Available to rent, the Anritsu MT9083B ACCESS Master optical time domain reflectometer (OTDR) reduces testing times to install and maintain FTTx, CATV, LAN, Access and Metro networks. Testing PONs with both high-resolution and high-dynamic range is what differentiates the MT9083B from other OTDRs.
Fluke 345 power-quality clamp meter
26 June, 2013The Fluke 345 power-quality clamp meter, available to rent from TechRentals, is suitable for commissioning and troubleshooting modern electrical loads, such as variable frequency drives, electronic lighting and UPS systems.
Agilent DSOX3024 digital storage oscilloscope
28 May, 2013The Agilent DSOX3024 digital storage oscilloscope offers 200 MHz of bandwidth with four channels and an update rate of 1 million waveforms/s.
Noshok vapour-actuated remote thermometers
15 May, 2013The Noshok’s vapour-actuated remote thermometers provide accurate temperature indication and are suitable for temperature measurement in power transformers, HVAC/R, paper mills, refineries, petrochemical, chemical, food processing and pharmaceutical applications, and for remote panel installations on service trucks in the oil and gas industry.
GigaNet Systems VirtualNet GE and XG 1G/10G ethernet test systems
15 May, 2013The GigaNet Systems VirtualNet GE and XG are inline (pass-thru) 1G/10G ethernet test systems that enable development and verification engineers to validate proper system response to error conditions that can occur in deployed systems.
Kingfisher KI7822 and KI7600 SM Light Source and Power Meter
19 March, 2013Available to rent, the Kingfisher KI7822 and KI7600 SM Light Source and Power Meter are used to test fibre-optic communications systems down to a traceable 1% accuracy. Singlemode fibre identification and attenuation are also suitable applications.
SEW ST-2001 digital DC and AC volt meter
15 March, 2013SEW 277 HP high-voltage detector
14 March, 2013The SEW model 277 HP is a non-contact, high-voltage detector suitable for voltages from 50 V to 132 kV via two operating ranges, 50 to 1500 V and 1500 V to 132 kV, selectable by means of range buttons.
SATEC BFM136 submeter
21 February, 2013The provision of data logging profiling ensures other critical data with date/time stamping is readily available during communication outages. Future proofing for time of use (TOU) for tariff readings on board the meter ensures data is not lost should communication issues transpire with the metering hardware and management software.
SATEC BFM136 multifunction power meter
21 February, 2013SATEC’s Branch Feeder Monitor Multifunction Power Meter Series offers metering capabilities for up to 36 current circuits within one device. Retrofit capabilities using split core current transformers make the SATEC BFM136 suitable for energy management solutions for existing commercial buildings, data centres, shopping complexes and hospitals for providing cost allocation for submetering needs.
