ProfiTAP XX-32Gportable

The ProfiTAP XX-32Gportable is a solution designed for consolidating multiple 10GbE and 1GbE span and/or 1GbE inline sources for monitoring and analysis tools.

Don’t be a fool - check your safety switches

Master Electricians Australia (MEA) has urged all Australians to check their safety switches. Chief executive Malcolm Richards said homeowners nationwide should take the extra time to ensure safety switches are in good working order.

SATEC PM130EH multifunction power meter

SATEC’s PM130EH provides full multifunction capabilities for measurement of all electrical parameters, volts, current, frequency, power factor, watt-hour, watts, VA, kVAR, demand, harmonics, etc. The PM130EH provides fast real-time, cycle-by-cycle measurements, averaging values 8, 16, 32 or 64 cycles selectable from the front keypad.

Olympus inspection and measurement systems at Austech 2013

‘Compact, lightweight and flexible’ will be the focus of the display by Olympus Industrial Business Unit (IBD) at Austech 2013 in May. The company’s display will feature some of the smallest models in its industry-leading portfolio of innovative test, measurement and imaging instruments.

SEW ST-2001 digital DC and AC volt meter

Avoid fire hazards with thermal imaging equipment

About a third of all industrial fires are created by electrical problems and electrical fires currently cost Australia $600 million per year. Many insurance companies are now requesting evidence of a Thermal Imaging Report when renewing policies as they see Preventative Maintenance as an extra step in reducing the instances of electrical fires.

SEW 277 HP high-voltage detector

The SEW model 277 HP is a non-contact, high-voltage detector suitable for voltages from 50 V to 132 kV via two operating ranges, 50 to 1500 V and 1500 V to 132 kV, selectable by means of range buttons.

OKW Ergo-Case XS body contoured electronics enclosures

Soanar has added to the Ergo-Case body contoured range of electronics enclosures from OKW Gehäusesysteme GmbH, the Ergo-Case XS.

SATEC BFM136 multifunction power meter

SATEC’s Branch Feeder Monitor Multifunction Power Meter Series offers metering capabilities for up to 36 current circuits within one device. Retrofit capabilities using split core current transformers make the SATEC BFM136 suitable for energy management solutions for existing commercial buildings, data centres, shopping complexes and hospitals for providing cost allocation for submetering needs.

SATEC BFM136 submeter

The provision of data logging profiling ensures other critical data with date/time stamping is readily available during communication outages. Future proofing for time of use (TOU) for tariff readings on board the meter ensures data is not lost should communication issues transpire with the metering hardware and management software.

Fluke VT02 visual infrared thermometer

Until now, electricians and industrial, HVAC and automotive technicians have had to choose between single-point infrared thermometers and high-resolution thermal imagers (infrared or IR cameras). The Fluke VT02 Visual IR Thermometer helps fill the gap, for when a single-spot temperature reading isn’t enough and a high-resolution thermal image is more than users need.

Hioki PW3360 power logger

The Hioki Model PW3360-20 clamp-on power logger is a compact, handheld power line analyser suitable for single- and three-phase, three- and four-wire circuits with voltages to 780.

Hioki RM3544 resistance meter

The Hioki Model 3544 resistance meter is a four-terminal instrument providing a basic resolution of 1 µΩ and has a large measurement range from 30 mΩ to 3.5 MΩ at a maximum measurable current of 300 mA.

AEMC digital FlexProbe 400D and 4000D current measurement

AEMC has released the Digital FlexProbe series for TRMS AC current measurements. The devices are rated at 600 V CAT IV and provide a solution for accessing electrical conductors in tight places.

Beamex MC2-IS multifunction calibrator

The ATEX and IECEx certified 2nd generation of the Beamex MC2-IS intrinsically safe (IS) multifunction calibrator is a practical tool designed for field calibration and testing in explosive environments.