Test instrument tester
01 April, 2008 | Supplied by: Nesco Electrical Products
The ‘Socket & See’ installer check box is a device to check the condition of different makes and models of loop, continuity and RCD testers.
Energy meters
01 April, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd
The IQ 250 and 260 electronic energy meters are an extension to the IQ 200 meter line that provides an improvement in functionality.
Luminaire EMC tester
01 April, 2008 | Supplied by: Westek Electronics Pty Ltd
The AFJ test system is designed to test both electronic and traditional ballasted luminaires, including those with switch-type starter circuits, measuring conducted and radiated interference effects.
KoCoS polyphase power analyser
01 April, 2008 | Supplied by: Westek Electronics Pty Ltd
The KoCoS EPPE W8 polyphase power analyser is suitable for internal as well as outdoor use, being equipped with battery backup as well as mains connectivity. The instrument can therefore be used to time and record severe sags as well as short outages.
Paperless recorders
01 April, 2008 | Supplied by: Yokogawa Australia Pty Ltd
The MV1000 and MV2000 paperless portable recorders feature an expanded number of input channels and more memory than the models they replace.
Compact testers
26 March, 2008 | Supplied by: RS
The Megger MIT200 series of insulation and continuity testers are small enough to slip into a pocket.
Network assistant
03 March, 2008 | Supplied by: TechRentals
The Fluke Etherscope Series II Network Assistant is a powerful handheld network troubleshooter for 10, 100 and gigabit, copper, fibre and wireless LANs.
Loop testers
27 February, 2008 | Supplied by: Megger Limited
The LTW300 earth loop impedance testers enable two-wire loop tests with no risk of tripping 30 mA RCDs, even where electronic RCDs are used. The testers are three-phase safe and category IV 300 V rated, making them suitable for use on supplies from 50 VAC single phase to 440 V three-phase installations.
Thermal imager software upgrade
01 February, 2008 | Supplied by: Fluke Australia Pty Ltd
An upgraded version of InsideIR software is available as a free download to Fluke Ti20 and Ti30 thermal imager users at http://us.fluke.com/usen/support/software.
Programmable power source
01 February, 2008 | Supplied by: Westek Electronics Pty Ltd
The California Instruments EC1000S 1 kVA AC and DC power supply is a comprehensive power source and test system that includes measurement and harmonic analysis of output current.
InfraCAM infrared thermal imager
01 February, 2008 | Supplied by: Teledyne FLIR
The InfraCAM infrared thermal imager range has been improved to provide more image storage, better image quality and more post-processing capabilities. It is designed to detect hot spots, avoid electrical failures, increase safety and even prevent fires.
DC current sensors
01 February, 2008 | Supplied by: Practical Control Solutions
The CYHCT-C2E range of open loop Hall effect current transducers are designed for DC current measurement with ranges from 300 to 1000 A. Typical applications include uninterruptible power supplies, welders, electroplating rectifiers and DC drive systems.
SL1000 data acquisition system
01 February, 2008 | Supplied by: Yokogawa Australia Pty Ltd
The SL1000 high-speed data acquisition unit uses the same input modules from the Yokogawa DL750/SL1400 family of portable ’scope-corders’ and adds a high-speed module with optical isolation and inputs up to 1 kV.
Fluke 1621 earth ground tester
01 February, 2008 | Supplied by: Fluke Australia Pty Ltd
The Fluke 1621 is an earth ground tester which provides basic ground testing methods with a simple user interface and intuitive functionality. It is a basic entry-level tester that complements Fluke’s 162x range of earth ground testers.
Thermal imager with data logging
29 January, 2008 | Supplied by: Emona Instruments Pty Ltd
The Electrophysics HotShot thermal imaging camera has an in-built PDA-type touch screen and Qwerty keyboard for data logging functions.
