Energy-saving TC-L lamps
27 February, 2008 | Thorn Lighting Pty Limited
The energy-saving TC-L compact fluorescent lamp produces a pleasant 'white' light and is specially designed for minor roads, residential areas and car parks.
Dual-mode energy controller
27 February, 2008 | Clipsal - by Schneider Electric
The 5610/240/4K8 energy controller is designed to save energy consumed by fluorescent lighting, claiming to save up to 25-30% by operating lights in 'economy mode' without sacrificing visibility, while extending the life of the tube, ballast and fitting and reducing its temperature.
Lindstrom cutters and pliers
27 February, 2008 | RS
The Rx series of cutters and pliers from Lindstrom have been developed for comfort and precision with tradespeople and technicians in mind.
Dual-voltage power system
27 February, 2008 | Tyco Electronics Energy Division (Crompton Instruments)
Infinity NE is a power system developed to address the need to provide dual-voltage power in a dynamic, changing environment.
High power outdoor LED lighting
27 February, 2008 | Save Power.com.au
The SPLU2/4/6 high power LED streetlights are designed for use in outdoor lighting applications such as streetlights, sidewalks, car parks, parks, industrial plants and billboard lighting.
Loop testers
27 February, 2008 | Megger Limited
The LTW300 earth loop impedance testers enable two-wire loop tests with no risk of tripping 30 mA RCDs, even where electronic RCDs are used. The testers are three-phase safe and category IV 300 V rated, making them suitable for use on supplies from 50 VAC single phase to 440 V three-phase installations.
Electronic push-button timers
27 February, 2008 | Clipsal - by Schneider Electric
The 31VETR3 electronic push-button timer is a three-wire time delay switch designed to automatically turn a light off after a preset period that can be selected from between 15 seconds and 254 minutes.
Arc-rated safety clothing
26 February, 2008 | Extreme Safety
The Rofa Clothing 1292 jacket is flame-resistant safety clothing that provides arc protection for work on electrical applications.
Energy controller
01 February, 2008 | Clipsal - by Schneider Electric
The 5610/240/4K8 energy controller is designed to save energy consumed by fluorescent lighting, claiming to save up to 25-30% by operating lights in ‘economy mode’ without sacrificing visibility, while extending the life of the tube, ballast and fitting and reducing its temperature.
Through-panel connections
01 February, 2008 | Micromax Pty Ltd
The Turck M12 eurofast junction box is claimed to save installation time by mounting one junction box instead of punching eight receptacle holes for through panel signal connections.
Pliers
01 February, 2008 | RS
The Rx series of cutters and pliers from Lindstrom have been developed for comfort and precision with tradespeople and technicians in mind.
Indoor/outdoor tight buffer fibre cable
01 February, 2008 | Belden Australia Pty Ltd
A series of indoor/outdoor tight buffer distribution cables has been added to the FiberExpress line of fibre-optic cabling solutions.
High-output green XLamp LED
01 February, 2008 | Cutter Electronics
Cree has released a high-output green XLamp XR-E LED that is claimed to be 70% brighter than the green power LED it replaces and complements the previously released blue XR-E LEDs for RGB LED applications.
InfraCAM infrared thermal imager
01 February, 2008 | Teledyne FLIR
The InfraCAM infrared thermal imager range has been improved to provide more image storage, better image quality and more post-processing capabilities. It is designed to detect hot spots, avoid electrical failures, increase safety and even prevent fires.
Decentralised maintenance switch
01 February, 2008 | Weidmuller Pty Ltd
The PowerBox Maintenance Switch with ‘on/off’ function and integrated power distribution is IP65 rated, making it suitable for installation in industrial applications.
