Infrared thermometer
01 October, 2008 | Supplied by: TRIO Test & Measurement
The Extech 42511/42512 dual laser infrared thermometer uses dual lasers to identify the exact measuring spot when they converge to a single spot.
Pocket-sized i5 thermography camera
01 October, 2008 | Supplied by: Teledyne FLIR
The pocket-sized i5 thermography camera was developed to service the growing demand for low-cost, high-performance thermal imaging cameras for commercial applications. Weighing 340 g, the i5 delivers commercial functionality in a light, compact format.
Power monitoring instrument
24 September, 2008 | Supplied by: TechRentals
The 3-phase PowerGuide 4400 advanced power monitoring instrument incorporates a colour touch screen into its lightweight design and is equipped with eight independent channels.
Trip-amplifier
01 September, 2008 | Supplied by: Weidmuller Pty Ltd
The Wave TTA Transmitter Trip-Amplifier is programmable to suit any common DC input type. The device will measure, monitor, convert, filter and isolate the signal, producing a DC analog output proportional to the input. It can be powered from any supply between 18 to 264 V (AC or DC), without modification, and has two fully configurable SPDT relay contact outputs capable of handling currents up to 3A.
Multifunction tester
01 September, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd
The Kyoritsu 6016 is a 10-in-1 multifunction tester, ergonomically styled with the top cover slotting in beneath the unit while the unit is in use.
Sound level meter
01 September, 2008 | Supplied by: RS
The Testo 815 portable sound level meter is designed for measuring sound levels in a wide range of commercial and industrial applications, including PA and entertainment systems or noise from machines, combustion systems, air conditioning or heating systems.
Advanced protection relay test system
27 August, 2008 | Supplied by: TechRentals
An advanced four-phase dynamic automatic protection relay test system, the Omicron CMC range is a universal system suitable for testing old and new generation relays, energy meters and transducers.
T200 and T250 infrared cameras
01 August, 2008 | Supplied by: Teledyne FLIR
The T200 and T250 handheld infrared cameras have been added to the T-Series range of thermal imaging instruments, designed for industrial and technical applications, with a ‘B-version’ also available for building and construction applications.
Safe field calibration
01 August, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
Intrinsic safety (IS) is a protection technique for safe operation of electronic equipment in explosive environments. An intrinsically safe calibrator is therefore designed to be incapable of causing ignition in the surrounding environment with flammable materials, such as gases, mists, vapours or combustible dust.
SafeTcheck Pro Logger II portable appliance tester
01 August, 2008 | Supplied by: TRIO Test & Measurement
The SafeTcheck Pro Logger II is an electrical portable appliance tester (PAT), designed and manufactured in Australia. The tester ensures the electrical safety of appliances complies with the requirements of the current Australian and New Zealand Standard AS/NZS3760 (In-service safety inspection and testing of electrical equipment).
PTI-160 series thermal imager
01 August, 2008 | Supplied by: OneTemp Pty Ltd
The PTI-160 series cameras offer an optimal price/performance ratio. Equipped with an integrated high-performance UFPA detector, they are quickly ready for use and deliver sharp, accurate thermal images for on-site problem analysis.
MIT and S1 insulation testers
01 August, 2008 | Supplied by: Megger Limited
The MIT and S1 insulation testers have been enhanced so that they now meet the requirements for use in CAT IV 600 V applications. This makes them suitable for performing measurements at the source of supply in low-voltage installations and offer immunity to high-voltage transients up to 8 kV.
High-resolution thermal imager
01 August, 2008 | Supplied by: Emona Instruments Pty Ltd
The Electrophysics HotShot-HD combines a high-definition thermal imaging camera with a PDA-type touch screen and QWERTY keyboard for data entry and data-logging functions.
71BC204T digital thermometer
01 August, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd
The Bell 71BC204T digital thermometer is designed for heating, ventilation and refrigeration applications to measure ambient air or liquid temperatures.
IR P660 thermography camera
01 August, 2008 | Supplied by: Teledyne FLIR
The IR P660 thermography camera has been developed for applications requiring higher image quality, temperature measurement accuracy and image detail than standard IR imagers. Such applications include utilities, energy, telecom, mining and facility management, often where assets needing inspection are scattered over larger areas.
