Fluke ScopeMeter 190 series II 4-channel portable scope
20 January, 2011 | Supplied by: Fluke Australia Pty Ltd
The ScopeMeter 190 series II, the claimed first 4-channel portable scope safety rated to CAT III 1000 V/CAT IV 600 V, combines performance, ruggedness and portability.
CHK PM35 power quality analyser/logger
10 January, 2011 | Supplied by: TechRentals
Available to rent, the CHK PM35 power quality analyser/logger is a portable power logger and disturbance analyser, supporting harmonic analysis as well as flicker and imbalance monitoring.
Fluke ScopeMeter 190 Series II handheld portable oscilloscopes
07 January, 2011 | Supplied by: Fluke Australia Pty Ltd
The ScopeMeter 190 Series II handheld portable oscilloscopes are claimed to be the first four-channel scopes suitable for harsh industrial environments and safety rated for CAT III 1000V/CAT IV 600 V environments.
Agilent U1270 series handheld digital multimeters
01 January, 2011 | Supplied by: Keysight Technologies Australia Pty Ltd
The U1270 series handheld digital multimeters (DMMs) have a wide range of measurement capabilities, including feature sets that are found only in higher-end industrial handheld DMMs.
NEC Avio Infrared Technologies InfRec R300 infrared thermal imager
17 December, 2010 | Supplied by: Applied Infrared Sensing
The NEC Avio Infrared Technologies InfRec R300 infrared thermal imager is a multipurpose, high-definition model suitable for R&D, predictive and preventive maintenance, quality control and other applications.
FLIR MeterLink wireless connection for IR cameras
10 December, 2010 | Supplied by: Teledyne FLIR
MeterLink is a wireless connection between selected FLIR cameras and Extech (a FLIR subsidiary) measurement instruments enabling them to ‘talk’ to each other.
Graphtec GL820 multichannel data logger
07 December, 2010 | Supplied by: Lontek
The Graphtec GL820 midi logger features 20 analog input channels, which can be expanded up to 200 channels.
testo 882 thermal imager
07 December, 2010 | Supplied by: Testo Pty Ltd
The testo 882 thermal imager provides high-detail and accurate results without the necessity of an interchangeable lens. Equipped with a 32° lens and 320 x 240 pixel detector, the model offers the user all image details at a glance, ensuring fast, uncomplicated and precise work. It allows even very small faults in difficult-to-access places or dangerous zones in industrial systems to be identified precisely and reliably - from a safe distance.
testo 876 camcorder-style thermal imager
07 December, 2010 | Supplied by: Testo Pty Ltd
The testo 876 thermal imager is styled in a camcorder design, equipped with a rotatable display that makes thermography possible, even in hard-to-access places.
Why measure low resistance?
06 December, 2010 | Supplied by: TechRentals
Measuring low resistance is an important electrical test because it helps identify components where the resistance has exceeded acceptable values, threatening several potential negative outcomes. These could include overheating, energy loss, protective fault device malfunction, poor grounding and catastrophic failure during power surges. Test results can be used to identify changes caused by fatigue, corrosion, vibration, temperature or other conditions that may occur at the site.
Switching developer benefits from test automation product
17 November, 2010 | Supplied by: Matrium Technologies Pty Ltd
Blade Network Technologies, a data centre ethernet switching company, has implemented Fanfare’s test automation product, iTest, to meet its increasing product development and time-to-market goals. Blade has saved approximately $500,000 in resource and equipment costs, sanity build times and time to market since implementing iTest.
SATEC BFM136 branch feeder monitor multifunction power meter series
11 November, 2010 | Supplied by: SATEC (Australia) Pty Ltd
The BFM136 branch feeder monitor multifunction power meter series has metering capabilities for up to 36 current circuits within one device.
AEMC handheld graphic MTX mobile multimeters
08 November, 2010 | Supplied by: AEMC Instruments
The AEMC handheld graphic MTX mobile multimeters have a resolution of 100,000 counts, 0.02% basic accuracy and up to a 200 kHz bandwidth. They feature a multiposition screen and push-button function selection and are suitable for both benchtop and handheld use. Model MTX3283B-BTCOMCM also features Bluetooth connectivity.
FLIR Systems fixed-mounted A-series cameras
28 September, 2010 | Supplied by: Teledyne FLIR
The fixed-mounted A-series cameras have been specifically designed for both the energy sector and process control industries to prevent and detect fires quickly and automatically. A fixed-mounted infrared camera can be installed discreetly and almost anywhere to identify abnormalities, safeguarding plant and measuring temperature differences to assess the overall situation.
SATEC PM130 Plus analog output expansion module for PM130 Plus
14 September, 2010 | Supplied by: SATEC (Australia) Pty Ltd
The PM130 Plus analog output expansion module for the PM130 Plus power meter provides four optically isolated analog outputs with an internal power supply.
