Emona Instruments ‘Test Sockets in Seconds’ training video
30 June, 2010 | Supplied by: Emona Instruments Pty Ltd
The Emona Instruments training video ‘Test Sockets in Seconds’ for the InstalTest Combo multifunction electrical installation tester shows electrical contractors how to test sockets in seconds without cumbersome trailing leads using the InstalTest Combo.
FLIR i40, i50, i60 infrared cameras
10 June, 2010 | Supplied by: Teledyne FLIR
The i40, i50, i60 from the i-series range of infrared cameras are suitable for solving electrical problems, identifying mechanical issues or pinpointing air leaks.
Think safety when selecting a multimeter
04 June, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd
Would you use the nearest handheld multimeter to measure mains voltage or some other high-energy source? Absolutely not! Just as different types of helmets are designed to protect against rockclimbing, bicycle and motorcycle accidents; different multimeters are designed with different levels of protection against common electrical hazards. For your own safety - and for the safety of others nearby - choose the right multimeter that’s designed to protect against specific hazards that will be encountered.
AEMC Instruments Simple Logger II Model L481
06 May, 2010 | Supplied by: AEMC Instruments
The Simple Logger II Model L481 is a bipolar 850 VDC data logger that offers a choice of data storage modes and storage rates, allowing operators to configure the logger to optimise memory usage for the application at hand.
Fluke Ti32 thermal imager
05 May, 2010 | Supplied by: TechRentals
The Fluke Ti32 thermal imager is suitable for use in troubleshooting and maintenance. It can be used for a wide range of electrical applications such as switch gear, panels, controls, fuses, transformers, receptacles, lighting, conductors, overhead buss work and motor control centres.
Testo 881 thermal imager
22 April, 2010 | Supplied by: Testo Pty Ltd
The testo 881 thermal imager enables facilities such as electrical swithchboards to be tested completely damage free, thereby identifying problems before malfunctions or fire risks occur.
Power Parameters Ponovo T200A universal tester
22 April, 2010 | Supplied by: Power Parameters Pty Ltd
The Ponovo T200A universal tester is also designed for the testing of current transformers (CTs) including polarity, ratio, excitation and burden impedance. It can also be used as a precision voltmeter and ammeter in the determination of CT parameters.
Power Parameters Ponovo PM 605A multi-function calibrator
22 April, 2010 | Supplied by: Power Parameters Pty Ltd
The Ponovo PM 605A multi-function calibrator is designed for use on three- and single-phase circuits and instruments as well as DC devices. It is suitable for AC and DC voltage, current, frequency, phase angle, power factor and power, with options available to calibrate revenue meters.
FLIR i7 infrared camera
22 April, 2010 | Supplied by: Teledyne FLIR
The FLIR i7 is an entry level infrared camera for building diagnostics, suited to plumbers, electricians, window installers, insulation installers or HVAC system technicians for use in all types of energy audits, electrical fault-finding and over-heating, dampness detection and building inspections.
Fluke 233 wireless remote display digital multimeter
22 April, 2010 | Supplied by: Fluke Australia Pty Ltd
The Fluke 233 wireless remote display digital multimeter features a removable magnetic display that allows users to be 10 m away from the measurement point - helpful for difficult measurements where display viewing is challenging - using low-power wireless technology that is not susceptible to interference.
Yokogawa GS200 programmable DC voltage/current source
22 April, 2010 | Supplied by: Yokogawa Australia Pty Ltd
The GS200 programmable DC voltage/current source generates low-noise DC voltage and current signals for a range of device driving and testing applications, while an optional monitoring feature turns it into a voltage and current measuring instrument.
Fluke 6105A and 6100B electrical power standards
22 April, 2010 | Supplied by: Fluke Australia Pty Ltd
The Fluke 6105A and 6100B electrical power standards are designed to deliver stable, precise reference power and energy for use in calibrating electrical measurement equipment in instrument service and calibration, electrical manufacturing and power utility applications.
Megger PAT320 portable appliance testers
22 April, 2010 | Supplied by: Megger Limited
The PAT320 portable appliance testers are ready to use in automatic mode straight from the box.
Celemetrix Bluelight BlueScope BL1000A 10 Gigabit ethernet tester
22 April, 2010 | Supplied by: Celemetrix Australia Pty Ltd
The Bluelight BlueScope BL1000A handheld 10 Gigabit ethernet tester includes a number of test modes to analyse 10 Gigabit ethernet systems.
Megger TDR 2000
22 April, 2010 | Supplied by: TechRentals
The Megger TDR 2000 is available for rental from TechRentals to perform single- and dual-channel measurements on a wide range of metallic cables.
